Crosby Shackle 2150 / S-2150

Crosby Shackle 2150 / S-2150

  • Working Load Limit and Grade 6 permanently shown on every shackle.
  • Forged, Quenched & Tempered, with alloy pins.
  • Hot-dip galvanized (G) or self-colored (S). 85 ton shackles have hot-dip galvanized bows and the bolts are Oimetcoted® and painted red.
  • Sizes 3/8 inch and below are mechanically galvanized.
  • Fatigue rated to 20,000 cycles at H/2 times the Working Load Limit.(1/2t – 55t).
  • Approved for use at -40° C (-40 degrees F) to 204 ° C ( 400° F).
  • Meets or exceeds all requirements of ASME B30.26.
  • Sizes 1/2 – 25t meet the performance requirements of EN13889:2003.
  • Shackles 55 metric tons and smaller can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of order.
  • Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and 2016 ABS Guide for Certification of Lifting Appliance. Certificates available when requested at time of order and may include additional charges.
  • Meets the performance requirements of Federal Specification RR C-271 G, Type IVB, Grade A, Class 3, except for those provisions required of the contractor.
  • All 2150 shackles can meet charpy requirements of 42 Joules (31 ft-lb) avg at -20° C (-4° F) upon special request.
  • Look for the Red Pin® … the mark of genuine Crosby quality.

G-2150 / S-2150 Bolt Type Chain Shackles

6:1 Design Factor. Maximum Proof Load is 2 times the Working Load Limit. For Working Load Limit reduction due to side loading applications. see Warnings & Applications. t Individually Proof Tested with certification.

Crosby Shackle
Crosby Shackle G-215/S-215
Crosby Shackle G-213/S-213
Crosby Shackle G-209/S-209
Crosby Shackle G-2130 / S-2130
Crosby Shackle G-210 / S-210

Crosby Shackle G-210 / S-210

Crosby Shackle G-210 / S-210

  • Forged, Quenched & Tempered, with alloy pins.
  • Working Load Limit and Grade 6 permanently shown on every shackle.
  • Hot-dip galvanized (G) or self colored (S).
  • Sizes 3/8 inch and below are mechanically galvanized.
  • Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles.
  • Shackles can be furnished proof tested with certificates to designated standards, such as ABS, ONV, Lloyds, or other certifications. Proof testing and certification available when requested at the time of order, charges will apply.
  • Approved for use at -40° C (-40° F) to 204° C (400° F).
  • All 209 and 21 O shackles can meet charpy requirements of 42 Joules (31 ft-lb) avg. at -20° c (-4° F) upon special request.
  • Meets or exceeds all requirements of ASME B30.26.
  • Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for Certification of Lifting Appliances available. Certificates available when requested at time of order and may include additional charges.
  • G-210 Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C- 271 G, Type IVB, Grade A, Class 2, except for those provisions required of the contractor.
  • Look for the Red Pin® … the mark of genuine Crosby quality

G-210 / S-210 Screw Pin Chain Shackles

6:1 Design Factor. Maximum Proof Load is 2 times the Working Load Limit. For Working Load Limit reduction due to side loading applications, see Warnings & Applications.

Crosby Shackle
Crosby Shackle G-2130 / S-2130
Crosby Shackle G-215/S-215
Crosby Shackle G-209/S-209
Crosby Shackle G-213/S-213
Crosby Shackle 2150 / S-2150

Crosby Shackle G-209/S-209

Crosby Shackle G-209/S-209

  • Meets performance requirements of Grade 6 shackles.
  • Forged, Quenched & Tempered, with alloy pins
  • Working Load Limit and Grade 6 permanently shown on every shackle
  • Hot-dip galvanized (G) or self colored (S)
  • Sizes 3/8 inch and below are mechanically galvanized.
  • Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles.
  • Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certifications. Proof testing and certification available when requested at the time of order, charges will apply.
  • Approved for use at -40° C (-40° F) to 204° c (400° F).
  • All 209 and 210 shackles can meet charpy requirements of 42 Joules (31 ft-lb) avg. at -20° C (-4° F) upon special request
  • Meets or exceeds all requirements of ASME 830.26.
  • Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for Certification of Lifting Appliances available. Certificates available when requested at time of order and may include additional charges.
  • G-209 Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C-271 G, Type IVA, Grade A, Class 2, except for those provisions required of the contractor.
  • Look for the Red Pin® … the mark of genuine Crosby quality

G-209 / S-209 Screw Pin Anchor Shackles

6:1 Design Factor. Maximum Proof Load is 2 times the Worlcing Load Limit. For Worlcing Load Limit reduction due to side loading applications, see Warnings & Applications.

Crosby Shackle
Crosby Shackle 2150 / S-2150
Crosby Shackle G-2130 / S-2130
Crosby Shackle G-215/S-215
Crosby Shackle G-213/S-213
Crosby Shackle G-210 / S-210

Crosby Shackle G-215/S-215

Crosby Shackle G-215/S-215

  • Forged, Quenched & Tempered, with alloy pins.
  • Working Load Limit permanently shown on every shackle.
  • Hot-dip galvanized (G) or self colored (S).
  • Sizes 3/8 inch and below are mechanically galvanized.
  • Fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit.
  • Shackles 25t and larger are RFID equipped.
  • Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Charges for proof testing and certification available when requested at the time of order.
  • Shackles are Quenched & Tempered and can meet DNV impact requirements of 42 Joules (31 ft-lb) at -20° C (-4° F).
  • G-213 Round pin anchor shackles meet the performance requirements of Federal Specification RR-C-271 G, Type IVA, Grade A, Class 1, except for those provisions required of the contractor.
  • DO NOT SIDE LOAD ROUND PIN SHACKLES.
  • Look for the Red Pin® … the mark of genuine Crosby quality.

G-215 / S-215 Round Pin Chain Shackles

6:1 Design Faclor. Maximum Proof Load is 2 times the Working Load Limit.

Crosby Shackle
Crosby Shackle G-209/S-209
Crosby Shackle G-2130 / S-2130
Crosby Shackle 2150 / S-2150
Crosby Shackle G-213/S-213
Crosby Shackle G-210 / S-210

Crosby Shackle G-213/S-213

Crosby Shackle G-213/S-213

  • Forged, Quenched & Tempered, with alloy pins.
  • Working Load Limit permanently shown on every shackle.
  • Hot-dip galvanized {G) or self colored (S).
  • Sizes 3/8 inch and below are mechanically galvanized.
  • Fatigue rated to 20,000 cycles at 1-1 /2 times the Working Load Limit.
  • Shackles 25t and larger are RFID equipped.
  • Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Charges for proof testing and certification available when requested at the time of order.
  • Shackles are Quenched & Tempered and can meet DNV impact requirements of 42 Joules (31 ft-lb) at -20° C (-4° F).
  • G-213 Round pin anchor shackles meet the performance requirements of Federal Specification RR-C-271 G, Type IVA, Grade A, Class 1, except for those provisions required of the contractor.
  • DO NOT SIDE LOAD ROUND PIN SHACKLES.
  • Look for the Red Pin® … the mark of genuine Crosby quality

G-213 / S-213 Round Pin Anchor Shackles

6:1 Design Factor. Maximum Proof Load is 2 times the Working Load Limit.

Crosby Shackle
Crosby Shackle G-210 / S-210
Crosby Shackle G-215/S-215
Crosby Shackle G-209/S-209
Crosby Shackle 2150 / S-2150
Crosby Shackle G-2130 / S-2130

Crosby Shackle G-2130 / S-2130

Crosby Shackle G-2130 / S-2130

G-2130 S-2130
  • Working Load Limit and Grade 6 permanently shown on every shackle.
  • Forged, Quenched & Tempered, with alloy bolts .
  • Hot-dip galvanized (G) or self colored (S). 85, 120, and 150-metric ton shackles are all hot-dip galvanized bows and the bolts are Dimetcoted® and painted red.
  • Sizes 3/8 and below are mechanically galvanized.
  • Fatigue rated to 20,000 cycles at 1-1 /2 times the Working Load Limit (1 /3t – 55t).
  • Approved for use at -40° C (-40° F) to 204° C (400° F).
  • Meets or exceeds all requirements of ASME B30.26.
  • Shackles 85 metric tons and larger are individually proof tested to 2.0 times the working load limit.
  • Type Approval certification in accordance with ABS 2016 Steel Vessel Rules ABS Guide for Certification of Lifting Appliances available. Certificates available when requested at time of order and may include additional charges.
  • 3.1 Certification as standard available for charpy and statistical proof test from 3.25t up to 25 tons to DNV 2. 7-1 and EN13889.
  • Crosby 3.25t through 25t G-21300C anchor shackles are type approved to DNV Certification Notes 2.7-1- 0ffshore Containers. These Crosby shackles are statistical proof and impact tested to 42 Joules (31 ft-lb) min. avg. at -20° C (-4° F). The tests are conducted by Crosby and 3.1 test certification is available upon request.
  • All other 2130 shackles can meet charpy requirements of 42 Joules (31 ft-lb) avg at -20° C (-4° F) when requested at time of order.
  • Meets the performance requirements of Federal Specification RR-C-271 G, Type IVA, Grade A, Class 3, except for those provisions required of the contractor.
  • Look for the Red Pin® … the mark of genuine Crosby quality.

G-2130 / S-2130 Bolt Type Anchor Shackles

6:1 Design Factor. Maximum Proof Load Is 2 times the Working Load Limit. For Working Load Limit reduction due to side loading applications, see Warnings & Applications ..
t lndividually Proof Tested with certification. t Furnished with eye bolts for handling.

Crosby Shackle
Crosby Shackle G-210 / S-210
Crosby Shackle G-215/S-215
Crosby Shackle G-213/S-213
Crosby Shackle G-209/S-209
Crosby Shackle 2150 / S-2150

error: