round pin chain shackle Archives - PT Galang Usaha Mandiri

30 Jun 2025

Stainless Steel Shackle No 732

Stainless Steel Shackle No 732 Dee shackle with countersunk pin

Material : AISI 316

Finish : Highly polished

Design Factor : 6:1

Documentation : Test certificate supplied upon request.

Split pin included

Gunnebo Shackle

Stainless Steel Shackle No 755

Stainless Steel Shackle No 735

Arctic Shackle No 856

Bow Shackle No 854 and No 855

Super Shackle No 858

Dee Shackle No 834 and No 835

26 Jun 2025

Crosby Shackle G-2130 / S-2130

Working Load Limit and Grade 6 permanently shown on every shackle.
Forged, Quenched & Tempered, with alloy bolts .
Hot-dip galvanized (G) or self colored (S). 85, 120, and 150-metric ton shackles are all hot-dip galvanized bows and the bolts are Dimetcoted® and painted red.
Sizes 3/8 and below are mechanically galvanized.
Fatigue rated to 20,000 cycles at 1-1 /2 times the Working Load Limit (1 /3t – 55t).
Approved for use at -40° C (-40° F) to 204° C (400° F).
Meets or exceeds all requirements of ASME B30.26.
Shackles 85 metric tons and larger are individually proof tested to 2.0 times the working load limit.
Type Approval certification in accordance with ABS 2016 Steel Vessel Rules ABS Guide for Certification of Lifting Appliances available. Certificates available when requested at time of order and may include additional charges.
3.1 Certification as standard available for charpy and statistical proof test from 3.25t up to 25 tons to DNV 2. 7-1 and EN13889.
Crosby 3.25t through 25t G-21300C anchor shackles are type approved to DNV Certification Notes 2.7-1- 0ffshore Containers. These Crosby shackles are statistical proof and impact tested to 42 Joules (31 ft-lb) min. avg. at -20° C (-4° F). The tests are conducted by Crosby and 3.1 test certification is available upon request.
All other 2130 shackles can meet charpy requirements of 42 Joules (31 ft-lb) avg at -20° C (-4° F) when requested at time of order.
Meets the performance requirements of Federal Specification RR-C-271 G, Type IVA, Grade A, Class 3, except for those provisions required of the contractor.
Look for the Red Pin® … the mark of genuine Crosby quality.

G-2130 / S-2130 Bolt Type Anchor Shackles

6:1 Design Factor. Maximum Proof Load Is 2 times the Working Load Limit. For Working Load Limit reduction due to side loading applications, see Warnings & Applications ..
t lndividually Proof Tested with certification. t Furnished with eye bolts for handling.

Crosby Shackle

Crosby Shackle G-210 / S-210

Crosby Shackle 2150 / S-2150

Crosby Shackle G-213/S-213

Crosby Shackle G-215/S-215

Crosby Shackle G-209/S-209

26 Jun 2025

Shackle

Crosby Shackles

G-213
Round pin anchor shackles meet the performance requirements of Federal Specification RR-C-271G, Type IVA, Grade A, Class 1, except for those provisions required of the contractor.

WLL (t) : 0.5 – 35

G-209
Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C- 271G, Type IVA, Grade A, Class 2, except for those provisions required of the contractor.

WLL (t) : 0.33 – 55

G-2130
Bolt type anchor shackles meet the performance requirements of Federal Specification RR-C-271G, Type IVA, Grade A, Class 3, except for those provisions required of the contractor.

WLL (t) : 0.33 – 150

G-210
Screw pin chain shackles meet the performance requirements of Federal Specification RR-C-271G, Type IVB, Grade A, Class 2, except for those provisions required of the contractor.

WLL (t) : 0.5 – 55

G-215
Round pin chain shackles meet the performance requirements of Federal Specification RR-C-271G, Type IVB, Grade A, Class 1, except for those provisions required of the contractor.

WLL (t) : 0.5 – 35

G-2150
Bolt type chain shackles meet the performance requirements of Federal Specification RR-C-271G, Type IVB, Grade A, Class 3, except for those provisions required of the contractor.

WLL (t) : 0.5 – 85