Crosby Shackle 2150 / S-2150

Crosby Shackle 2150 / S-2150

  • Working Load Limit and Grade 6 permanently shown on every shackle.
  • Forged, Quenched & Tempered, with alloy pins.
  • Hot-dip galvanized (G) or self-colored (S). 85 ton shackles have hot-dip galvanized bows and the bolts are Oimetcoted® and painted red.
  • Sizes 3/8 inch and below are mechanically galvanized.
  • Fatigue rated to 20,000 cycles at H/2 times the Working Load Limit.(1/2t – 55t).
  • Approved for use at -40° C (-40 degrees F) to 204 ° C ( 400° F).
  • Meets or exceeds all requirements of ASME B30.26.
  • Sizes 1/2 – 25t meet the performance requirements of EN13889:2003.
  • Shackles 55 metric tons and smaller can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of order.
  • Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and 2016 ABS Guide for Certification of Lifting Appliance. Certificates available when requested at time of order and may include additional charges.
  • Meets the performance requirements of Federal Specification RR C-271 G, Type IVB, Grade A, Class 3, except for those provisions required of the contractor.
  • All 2150 shackles can meet charpy requirements of 42 Joules (31 ft-lb) avg at -20° C (-4° F) upon special request.
  • Look for the Red Pin® … the mark of genuine Crosby quality.

G-2150 / S-2150 Bolt Type Chain Shackles

6:1 Design Factor. Maximum Proof Load is 2 times the Working Load Limit. For Working Load Limit reduction due to side loading applications. see Warnings & Applications. t Individually Proof Tested with certification.

Crosby Shackle
Crosby Shackle G-210 / S-210
Crosby Shackle G-215/S-215
Crosby Shackle G-2130 / S-2130
Crosby Shackle G-213/S-213
Crosby Shackle G-209/S-209

Crosby Shackle G-210 / S-210

Crosby Shackle G-210 / S-210

  • Forged, Quenched & Tempered, with alloy pins.
  • Working Load Limit and Grade 6 permanently shown on every shackle.
  • Hot-dip galvanized (G) or self colored (S).
  • Sizes 3/8 inch and below are mechanically galvanized.
  • Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles.
  • Shackles can be furnished proof tested with certificates to designated standards, such as ABS, ONV, Lloyds, or other certifications. Proof testing and certification available when requested at the time of order, charges will apply.
  • Approved for use at -40° C (-40° F) to 204° C (400° F).
  • All 209 and 21 O shackles can meet charpy requirements of 42 Joules (31 ft-lb) avg. at -20° c (-4° F) upon special request.
  • Meets or exceeds all requirements of ASME B30.26.
  • Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for Certification of Lifting Appliances available. Certificates available when requested at time of order and may include additional charges.
  • G-210 Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C- 271 G, Type IVB, Grade A, Class 2, except for those provisions required of the contractor.
  • Look for the Red Pin® … the mark of genuine Crosby quality

G-210 / S-210 Screw Pin Chain Shackles

6:1 Design Factor. Maximum Proof Load is 2 times the Working Load Limit. For Working Load Limit reduction due to side loading applications, see Warnings & Applications.

Crosby Shackle
Crosby Shackle G-2130 / S-2130
Crosby Shackle G-215/S-215
Crosby Shackle 2150 / S-2150
Crosby Shackle G-209/S-209
Crosby Shackle G-213/S-213

Crosby Shackle G-209/S-209

Crosby Shackle G-209/S-209

  • Meets performance requirements of Grade 6 shackles.
  • Forged, Quenched & Tempered, with alloy pins
  • Working Load Limit and Grade 6 permanently shown on every shackle
  • Hot-dip galvanized (G) or self colored (S)
  • Sizes 3/8 inch and below are mechanically galvanized.
  • Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles.
  • Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certifications. Proof testing and certification available when requested at the time of order, charges will apply.
  • Approved for use at -40° C (-40° F) to 204° c (400° F).
  • All 209 and 210 shackles can meet charpy requirements of 42 Joules (31 ft-lb) avg. at -20° C (-4° F) upon special request
  • Meets or exceeds all requirements of ASME 830.26.
  • Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for Certification of Lifting Appliances available. Certificates available when requested at time of order and may include additional charges.
  • G-209 Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C-271 G, Type IVA, Grade A, Class 2, except for those provisions required of the contractor.
  • Look for the Red Pin® … the mark of genuine Crosby quality

G-209 / S-209 Screw Pin Anchor Shackles

6:1 Design Factor. Maximum Proof Load is 2 times the Worlcing Load Limit. For Worlcing Load Limit reduction due to side loading applications, see Warnings & Applications.

Crosby Shackle
Crosby Shackle G-215/S-215
Crosby Shackle G-2130 / S-2130
Crosby Shackle 2150 / S-2150
Crosby Shackle G-210 / S-210
Crosby Shackle G-213/S-213

Crosby Shackle G-215/S-215

Crosby Shackle G-215/S-215

  • Forged, Quenched & Tempered, with alloy pins.
  • Working Load Limit permanently shown on every shackle.
  • Hot-dip galvanized (G) or self colored (S).
  • Sizes 3/8 inch and below are mechanically galvanized.
  • Fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit.
  • Shackles 25t and larger are RFID equipped.
  • Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Charges for proof testing and certification available when requested at the time of order.
  • Shackles are Quenched & Tempered and can meet DNV impact requirements of 42 Joules (31 ft-lb) at -20° C (-4° F).
  • G-213 Round pin anchor shackles meet the performance requirements of Federal Specification RR-C-271 G, Type IVA, Grade A, Class 1, except for those provisions required of the contractor.
  • DO NOT SIDE LOAD ROUND PIN SHACKLES.
  • Look for the Red Pin® … the mark of genuine Crosby quality.

G-215 / S-215 Round Pin Chain Shackles

6:1 Design Faclor. Maximum Proof Load is 2 times the Working Load Limit.

Crosby Shackle
Crosby Shackle G-210 / S-210
Crosby Shackle G-2130 / S-2130
Crosby Shackle 2150 / S-2150
Crosby Shackle G-209/S-209
Crosby Shackle G-213/S-213

Crosby Shackle G-213/S-213

Crosby Shackle G-213/S-213

  • Forged, Quenched & Tempered, with alloy pins.
  • Working Load Limit permanently shown on every shackle.
  • Hot-dip galvanized {G) or self colored (S).
  • Sizes 3/8 inch and below are mechanically galvanized.
  • Fatigue rated to 20,000 cycles at 1-1 /2 times the Working Load Limit.
  • Shackles 25t and larger are RFID equipped.
  • Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Charges for proof testing and certification available when requested at the time of order.
  • Shackles are Quenched & Tempered and can meet DNV impact requirements of 42 Joules (31 ft-lb) at -20° C (-4° F).
  • G-213 Round pin anchor shackles meet the performance requirements of Federal Specification RR-C-271 G, Type IVA, Grade A, Class 1, except for those provisions required of the contractor.
  • DO NOT SIDE LOAD ROUND PIN SHACKLES.
  • Look for the Red Pin® … the mark of genuine Crosby quality

G-213 / S-213 Round Pin Anchor Shackles

6:1 Design Factor. Maximum Proof Load is 2 times the Working Load Limit.

Crosby Shackle
Crosby Shackle 2150 / S-2150
Crosby Shackle G-210 / S-210
Crosby Shackle G-2130 / S-2130
Crosby Shackle G-209/S-209
Crosby Shackle G-215/S-215

Stainless Steel Shackle No 732

Stainless Steel Shackle No 732 Dee shackle with countersunk pin

Material : AISI 316

Finish : Highly polished

Design Factor : 6:1

Documentation : Test certificate supplied upon request.

Split pin included

Gunnebo Shackle
Stainless Steel Shackle No 735
Super Shackle No 858
Stainless Steel Shackle No 755
Bow Shackle No 854 and No 855
Dee Shackle No 834 and No 835
Arctic Shackle No 856

Stainless Steel Shackle No 755

Stainless Steel Shackle No 755 Bow shackle with safety bolt

Material : AISI 316

Finish : Highly polished

Design Factor : 6:1

Documentation : Test certificate and traceable 3.1 certificate supplied upon request.

Split pin included

Gunnebo Shackle
Stainless Steel Shackle No 732
Bow Shackle No 854 and No 855
Dee Shackle No 834 and No 835
Arctic Shackle No 856
Stainless Steel Shackle No 735
Super Shackle No 858

Stainless Steel Shackle No 735

Stainless Steel Shackle No 735 Dee shackle with safety bolt

Material : AISI 316

Finish : Highly polished

Design Factor : 6:1

Documentation : Test certificate and traceable 3.1 certificate supplied upon request.

Split pin included

Gunnebo Shackle
Stainless Steel Shackle No 755
Stainless Steel Shackle No 732
Bow Shackle No 854 and No 855
Super Shackle No 858
Dee Shackle No 834 and No 835
Arctic Shackle No 856

Super Shackle No 858

Super Shackle No 858 Bow shackle with safety bolt

Unique Benefits with The Super Shackle

In certain situations a demand for extra Working Load Limit occurs in others the lifting environment has limited space for the lifting application. The 858 Super Shackle enables a higher working load limit for the same nominal size.

The Super shackle meets the US Federal Specification RR.C-271. It is a grade 8 shackle and has all parts hot dipped galvanized, including the safety bolt.

Standard : US Federal Spec. RR.C-271 Type IVA Class 3, Grade B

Material : High tensile steel. Quenched & Tempered, Grade 8

Finish : All parts hot-dip galvanized + brown color marking

Design Factor : 5:1

Documentation : Test certificate and traceable 3.1 certificate

Temperature :-40°C to 200°C

Split pin included

Gunnebo Shackle
Stainless Steel Shackle No 755
Dee Shackle No 834 and No 835
Stainless Steel Shackle No 735
Bow Shackle No 854 and No 855
Stainless Steel Shackle No 732
Arctic Shackle No 856

Arctic Shackle No 856

Arctic Shackle No 856 Bow shackle with safety bolt

Unique benefits with the Arctic Shackle

Adverse weather and rough sea conditions in combination with extremely low temperatures, as often encountered for instance in the North Sea, places tough requirements on the products used. 856 Arctic shackles are specially designed for these conditions. The Arctic Shackle is type approved to DNV 2.7-1 Offshore containers and meets the impact requirements of 42 J at – 40 degrees 2C.

The Arctic Shackle is a grade 8 shackle with all parts hot-dip galvanized, including the safety bolt, and has the characteristic brown color marking.

Standard : DNV 2.7-1, US Federal Spec. RR.C-271 and EN-13889

Material : Special alloy steel, Quenched & Tempered, Grade 8

Finish : All parts hot-dip galvanized+ brown color marking

Design Factor : As specified in the table below

Documentation : Test certificate and traceable raw material I inspection certificate acc. EN 10204 – 3.1.
DNVGL-ST-E271-2.7-1 and E273-2.7-3 Type Approval Certification.

Temperature : – 40°C to 200°c

Split pin included

Gunnebo Shackle
Bow Shackle No 854 and No 855
Super Shackle No 858
Stainless Steel Shackle No 732
Stainless Steel Shackle No 755
Stainless Steel Shackle No 735
Dee Shackle No 834 and No 835

error: